The article titled “How to Add Additional Spaces to the Victron Lynx Distributor” provides a comprehensive guide on expanding the capacity of the Victron Lynx Distributor fused busbar system. Presented in a professional tone, the author, Nate from EXPLORIST life – DIY Campers, demonstrates step-by-step instructions for adding 1-2 fused spaces to the distributor. However, if more spaces are required (3-4), the article suggests considering the addition of a second Lynx Distributor, as they can be easily bolted together. The article also includes a list of additional resources that may assist readers in planning and installing their DIY campers, covering topics such as electrical installation, power audit, basic components of an electrical system, wire stripping, crimping, and wiring solar panels in series-parallel. Overall, this informative article provides practical guidance to those seeking to expand the functionality of their Victron Lynx Distributor.
How to Add Additional Spaces to the Victron Lynx Distributor
Check out these awesome Van Life Guides!
Introduction
The Victron Lynx Distributor is a powerful and versatile electrical distribution system that allows for the efficient and safe distribution of power in various applications. However, in some cases, you may find a need to add additional spaces to the Lynx Distributor to accommodate more electrical connections. This article will guide you through the step-by-step process of adding these additional spaces to your Victron Lynx Distributor, ensuring that your electrical system remains organized and optimized.
Step 1: Removing the Cover
Before you can begin adding additional spaces to the Lynx Distributor, you must first remove the cover. Start by turning off the power to the Lynx Distributor and disconnecting any external power sources. Then, use a screwdriver to remove the screws holding the cover in place. Carefully lift off the cover, being cautious not to damage any of the internal components.
Step 2: Choosing the Fuse Holder
The next step in adding additional spaces to the Victron Lynx Distributor is to choose the appropriate fuse holder. Consider the amperage requirements of the devices or circuits you plan to connect and select a fuse holder that can accommodate those requirements. It is essential to choose a fuse holder that is compatible with the Lynx Distributor and meets all safety standards.
If You Love Van Life, You Will Not Want To Miss These, Click Here to Read More Awesome!
Step 3: Attaching the Fuse Holder to the Positive Bus Bar
Once you have selected the appropriate fuse holder, you can proceed to attach it to the positive bus bar in the Lynx Distributor. The positive bus bar is where all the positive connections are made, and it is essential to ensure a secure and reliable connection. Use a screwdriver to loosen the screws on the positive bus bar and carefully slide the fuse holder onto the bar. Tighten the screws securely, ensuring that the fuse holder is firmly attached.
Step 4: Attaching the Positive Wire
With the fuse holder securely in place, you can now attach the positive wire. Start by stripping the insulation from the end of the positive wire, exposing the bare copper. Insert the bare copper wire into the appropriate terminal on the fuse holder and tighten the terminal screw to establish a secure connection. Ensure that the positive wire is properly routed and secured, minimizing the risk of damage or accidental disconnection.
Step 5: Attaching the Negative Wire
In addition to the positive wire, it is essential to connect the negative wire to complete the electrical circuit. Locate the negative bus bar in the Lynx Distributor and use a screwdriver to loosen the screws. Strip the insulation from the end of the negative wire and insert it into the appropriate terminal on the negative bus bar. Tighten the screw securely, ensuring a proper electrical connection.
Step 6: Tips and Tricks for Wire Size
When adding additional spaces to the Victron Lynx Distributor, it is crucial to consider the appropriate wire size. The wire size should be selected based on the maximum current it will carry and the length of the wire run. Consult the Victron Lynx Distributor’s user manual or seek professional guidance to ensure that you choose the correct wire size. Remember that using an inadequate wire size can result in excessive voltage drop and potential hazards.
Step 7: Adding Two Additional Spaces
Now that the fuse holder, positive and negative wires are securely attached, you can proceed to add two additional spaces to the Victron Lynx Distributor. The Lynx Distributor is designed to be modular, and additional spaces can be easily added by sliding them into the existing slots. Ensure that the added spaces are seated correctly and securely within the Lynx Distributor, maintaining proper alignment for efficient power distribution.
Step 8: Considering Adding a Second Lynx Distributor
If you find that the need for additional spaces is a recurring requirement within your electrical system, it may be worth considering the installation of a second Victron Lynx Distributor. Adding a second Lynx Distributor allows for even more flexibility and expandability, providing additional spaces for future electrical connections. It is recommended to consult with a professional electrician or refer to the Victron Lynx Distributor’s user manual to determine the appropriate installation procedures for a second Lynx Distributor.
Conclusion
In conclusion, adding additional spaces to the Victron Lynx Distributor is a straightforward process that requires careful attention to detail and adherence to proper installation methods. By following the step-by-step instructions outlined in this article, you can easily expand the capacity of your Lynx Distributor and accommodate more electrical connections. Remember to choose the appropriate fuse holder, wire size, and ensure secure connections to guarantee the safe and efficient distribution of power within your electrical system.
